• Jaw Crusher
    Jaw CrusherJaw crusher used as coarse crushing and secondary crushing when crush the hard stones...
  • Ball Mill
    Ball MillBall mill is used to grinding ores or other materials after crusher, it is the mechan...
  • Rotary Kiln
    Rotary KilnThe rotary kiln mainly including kiln body,driving device,supporting device, catch wh...
  • Rotary Dryer
    Rotary DryerRotary dryers can be widely used to dry various materials, such as metallic and nonme...
  • Raymond Mill
    Raymond MillRaymond Mill is mainly applied to the powder processing of mineral products in indust...


  • TEL: +86-371-6799 6871
  • E-mail: info@xbzg.com
  • Yahoo:xingbang.sales
  • MSN: support@china-xingbang.com

The problems should be paid attention to during the using of jaw crusher

Source:Henan Xingbang Heavy Machinery Co.,Ltd. Date:08/16/2013

 A:the maintance and using of the jaw crusher

1.The crusher must be in normal operation before feeding
2.The raw material should be feeded into the crushing cavity uniform
3.In normal condition,the temperature of the bearing shouldn't be more 30℃,and the max temperature is 70℃,or must stop the crusher,and look for the reason.
4.Before stoping the crusher,should stop feeding material;and all the material must be discharged before stop the motor.
5.During the using,if the crusher stop caused by crushing cavity jammed,user should close the motor rapidly,and discharge all the material.
6.After one end of the jaw plate wear,user can have an U-turn for use.

B: Lubrication of Jaw crusher
1.Pay attention to timely good lubrication for the friction surface,which can help the machine's operation and extend the service life.
2.Choosing grease for jaw crusher should according to the place ,temperature and other factors,generally,user can adopt calcium based, sodium or calcium sodium based grease.
3.The grease that should add to the bearing seat should be 450-70% of the total volume,and replace once each three month;before replace the new,user should use the  gasoline or kerosene clean the dirty between bearing and bearing seat
4.Before start the machine,user should add grease into the touching place of bracket brackets pad.

Previous | New outlook of quartz ore production in glass... Next | The application of jaw crusher and hammer cru...

Related News: